Hydrojet Drain Cleaning & Sewer Line Jetting in North Texas
High-Pressure Drain Cleaning That Clears the Blockage and Restores Full Flow
When a drain keeps backing up after it has already been snaked, the blockage is still there. Hydrojetting clears the pipe completely — grease, sludge, scale and roots — using high-pressure water instead of a cable that punches a hole through the clog. CR Plumbing, Air & Electric provides hydrojet drain cleaning and sewer line jetting for homes and businesses across Argyle, Flower Mound, Denton, Fort Worth and the surrounding areas. Every job starts with a camera inspection so we know exactly what we are dealing with.
Camera Inspection First
We scope the line before jetting so we know what is causing the blockage and where it sits. No guessing, and no jetting a pipe that needs repair instead.
Licensed Drain & Sewer Technicians
Hydrojetting at 4,000 PSI needs someone who knows what a pipe can take. Our licensed technicians match pressure and nozzle to the pipe material and condition.
Grease, Sludge, Scale & Roots
High-pressure water scours the full diameter of the pipe. It removes what a cable auger leaves behind, which is why the clog stops coming back.
Same-Day Service Available
Backed-up drains do not wait. We offer same-day hydrojetting across Argyle, Flower Mound, Denton and nearby communities.
Hydrojet Drain Cleaning Services in Texas
Hydrojetting is the most thorough way to clear a blocked drain or sewer line. A high-pressure hose delivers water at up to 4,000 PSI through a specialised nozzle, scouring the inside walls of the pipe and flushing everything out. It handles grease, soap scum, sludge, mineral scale and root intrusion — the things that build up slowly and cause the same drain to clog again and again.
Every hydrojet drain cleaning job starts with a camera inspection. We run a scope down the line to find the blockage, confirm what it is, and check the condition of the pipe itself. That last part matters: hydrojetting is safe for pipes in sound condition, but a line that is already cracked or collapsing needs repair, not pressure. Inspecting first is how we avoid making a bad pipe worse.
Once the line is clear, we re-scope it so you can see the result. If the inspection turns up a deeper problem — a bellied line, root damage, a break — we will tell you and walk you through the repair options, including trenchless sewer repair where it fits.
Call (940) 370-5663 to schedule hydrojet drain cleaning.
Root Intrusion Removal
Tree roots find their way into older sewer lines through joints and cracks. Hydrojetting with a root-cutting nozzle clears them and the camera shows where they entered, so you know whether a repair is needed.
Sewer Line Hydro Jetting
Main sewer line blockages cause backups at the lowest drains in the house first. We jet the full line from the cleanout, clearing roots, sludge and years of buildup, and re-scope to confirm the line is clear end to end.
Kitchen & Grease Blockage Removal
Grease coats the pipe wall and hardens. Snaking cuts a channel through it, jetting removes it. This is the fix when the kitchen drain clogs every few months no matter what you pour down it.
Hydrojetting Services for Drain & Sewer Cleaning
Residential Hydrojet Drain Cleaning
For homes across Flower Mound, Argyle, Southlake and North Richland Hills, hydrojetting solves the drain that will not stay clear. Kitchen lines packed with grease, bathroom lines narrowed by soap and hair, laundry drains full of lint and detergent residue. We clear the full pipe diameter rather than punching through the middle, which is the difference between a fix that lasts and one that fails again in two months.
Sewer Line Jetting
If more than one fixture is backing up, or the lowest drain in the house gurgles when you run water elsewhere, the problem is usually the main sewer line rather than an individual drain. We access the line at the cleanout, scope it to locate the blockage, and jet the full run. Sewer line hydro jetting clears roots, collapsed sludge, scale and debris that a cable auger cannot reach.
Commercial & Restaurant Drain Jetting
Commercial kitchens generate grease at a volume no residential line ever sees, and a blocked line during service is an expensive problem. We provide hydrojetting for restaurants, retail and commercial properties across DFW, and can set up a scheduled jetting programme so lines are cleared before they back up rather than after.
Camera Inspection & Drain Diagnostics
Sewer camera inspection is included with hydrojetting, and it is also available on its own. It is the only way to see what is actually happening inside the line — whether the problem is a soft blockage that jetting will clear, or a structural issue that needs repair. We record the inspection and go through the footage with you.
Preventive Drain Maintenance
For properties with a history of recurring blockages, or commercial kitchens where buildup is constant, scheduled hydrojetting keeps lines flowing and avoids emergency callouts. We will recommend an interval based on what the camera shows rather than a generic schedule.
Hydrojetting vs Snaking: Which Does Your Drain Need?
A cable auger, or snake, works by boring a hole through the blockage. Water starts flowing again, so the drain seems fixed — but the grease, sludge or roots are still coating the pipe wall, and the opening closes back up over the following weeks or months.
Hydrojetting scours the full diameter of the pipe. Nothing is left behind for the next clog to build on. That is why hydrojetting costs more up front and why it is the right call when a drain has been snaked before and clogged again.
Snaking is still the better choice for a simple, one-off blockage close to the fixture, and for pipes in poor structural condition that cannot take the pressure. The camera inspection tells us which situation you are in before we recommend either one.
What Does Hydrojetting Cost?
Hydrojetting costs more than snaking a drain, and less than repeatedly snaking the same drain every few months. The price depends on which line needs clearing, how accessible the cleanout is, and what the camera inspection shows.
A single kitchen or bathroom line is the lower end. A full main sewer line jetting job, with camera inspection before and after, sits higher. Commercial and restaurant work is quoted on the property.
We give you the price before we start, after the camera inspection tells us what we are dealing with. If the scope shows the line needs repair rather than jetting, we will tell you that instead of jetting it anyway. Call (940) 370-5663 for a quote.
Frequently Asked Questions
How do I know if I need hydrojetting?
If a drain has been snaked before and clogged again, hydrojetting is usually the answer. Other signs: multiple fixtures backing up at once, slow drains throughout the house, gurgling sounds, or sewage smell around floor drains. A camera inspection confirms it.
Does hydrojetting damage old pipes?
Not when it is done correctly. Hydrojetting is safe for pipes in sound structural condition, and our technicians adjust pressure and nozzle to the pipe material. This is exactly why we run a camera inspection first — a line that is already cracked or collapsing needs repair, not pressure, and we will tell you before we jet.
How long does the hydrojetting take?
Most residential drain jetting jobs are completed in a couple of hours including the camera inspection before and after. A full main sewer line, or a heavily blocked commercial line, can take longer.
Is hydrojetting different from snaking a drain?
Yes. A snake bores a hole through the blockage so water flows again, but leaves the buildup on the pipe walls. Hydrojetting scours the full pipe diameter and flushes everything out. That is why snaked drains often re-clog within months and jetted ones do not.
Can I use this service in restaurants or commercial spaces?
Yes, and commercial kitchens are one of the best uses for it. Grease volume in a restaurant line is far higher than in a home, and scheduled hydrojetting prevents the mid-service backup that shuts a kitchen down. We service restaurants and commercial properties across DFW.
What’s the cost of hydrojetting?
It depends on which line needs clearing, how accessible the cleanout is, and what the camera inspection shows. A single kitchen or bathroom line is at the lower end; a full main sewer line with inspection sits higher. We quote the price before starting work.
Do you jet sewer lines?
Yes. Sewer line hydro jetting is one of our main services. We access the line at the cleanout, scope it to find the blockage, jet the full run, and re-scope to confirm it is clear. This handles roots, sludge and scale that a cable auger cannot remove.
How often should hydrojetting be done?
For most homes, only when there is a problem. For properties with recurring blockages or commercial kitchens, a scheduled interval makes sense — often annually or semi-annually. We base the recommendation on what the camera inspection shows rather than a generic schedule.
Will hydrojetting improve overall plumbing performance?
Yes. Clearing the full pipe diameter restores the line to its designed capacity, so drains empty faster and the system handles normal use without backing up. It also removes the buildup that future clogs would form on.
How Hydrojet Drain Cleaning Works
Camera Inspection
We scope the line to locate the blockage, identify what is causing it, and check the pipe is sound enough for jetting.
High-Pressure Jetting
A specialised nozzle delivers water at up to 4,000 PSI, scouring the full pipe diameter and flushing the debris out.
Final Camera Check
We re-scope the line so you can see it is clear, and flag anything the inspection turned up that needs attention.
Flower Mound
3121 Cross Timbers Rd #11 Flower Mound, TX 75028
North Richland Hills
4925 Davis Blvd Suite 201 North Richland Hills, TX 76137
Richland Hills
3113 Elm Park St. Richland Hills, TX 76118
Argyle, TX
2231 Berniece Jones Rd. #103 Argyle, TX 76226