Why are dryer vent fire-safety upgrades important?

Upgrading your dryer vent helps prevent overheating, lint ignition, and airflow blockages that increase fire risk. Modern systems use metal ducting, proper routing, and sealed joints that support safer operation. These upgrades also improve drying efficiency and reduce energy consumption.

What makes your dryer vent installations NFPA compliant?

Every installation follows National Fire Protection Association standards, ensuring correct duct routing and secure metal connections. The focus is on minimizing heat traps, preventing leaks, and eliminating areas where lint can accumulate. This approach delivers safer, longer lasting airflow performance.

Do you verify that the dryer vent is completely clean after service?

Yes, technicians record before and after borescope footage to show the duct’s internal condition. This visual proof confirms that lint has been fully removed and repairs were completed correctly. Homeowners get full transparency and confidence in the work performed.

How do you measure whether my dryer vent is exhausting air safely?

NATE certified specialists use static pressure tools to measure how efficiently air moves through the duct. If readings exceed safe levels, it signals restrictions or alignment issues that need correction. These measurements help ensure the system operates without overheating or wasting energy.

Can all dryer vent repairs or replacements be done in one visit?

Most projects are completed in a single appointment because technicians arrive with all necessary tools and code approved materials. This avoids repeat visits and speeds up the process. Homeowners appreciate the convenience of quick, efficient service that restores safe airflow immediately.

Serving Argyle, Flower Mound, Keller, North Richland Hills & Surrounding Areas

+ 1200 Reviews

WE OFFER FINANCING

CR Home Protection Plan

Call for Home Services

(940) 370-5663

Dryer Vent & Duct Services in DFW

Q: When should I schedule a professional dryer vent inspection?

If your dryer takes longer to dry, feels unusually hot, or has not been serviced recently, an inspection is recommended. These signs often indicate airflow restrictions or developing safety issues inside the duct. Timely service prevents fire hazards and restores efficient, reliable drying performance.

Does your dryer take two cycles to dry a load? Does the laundry room feel hot and stuffy? A clogged or crushed vent is the most common reason. We install, repair and clear dryer vents for homes across the Dallas–Fort Worth area, so the lint ends up outside and not inside your walls.

Built to code

Rigid metal duct, tight joints and an outside cap that opens and closes properly. We follow the dryer maker's instructions and local code. [Confirm the standards CR actually works to before naming any].

We show you what we found

Photos of the vent before and after, so you can see the problem and the fix. [Confirm CR takes photos or camera footage on every job].

Airflow we can measure

We check how well air moves out of the vent before and after the work, not just whether it looks clean.

Done in a single visit when possible

Most cleanings and many repairs can be finished the same day. Bigger reroutes may take longer, and we'll tell you up front.

Dryer vent installation , repair and cleaning for DFW homes

A dryer pushes hot, damp air and lint out of the house through a duct that most people never look at. When that duct gets crushed behind the machine, packed with lint, or runs too far with too many bends, the dryer works harder, clothes stay damp, and lint builds up where it shouldn’t. That’s a fire risk, and it also costs you money every time you run a load.

CR Plumbing, Air & Electric works on all of it. As a dryer vent contractor, we handle dryer vent repair and installation, cleaning out a clogged line, and fixing a loose elbow or a disconnected joint. If you aren’t sure what you need, call and describe what the dryer is doing. We’ll point you in the right direction.

Dryer Vent Replacement

Clearing built-up lint from the duct so your dryer can breathe again.

Lint Removal

Clearing built-up lint from the duct so your dryer can breathe again.

Elbow & Joint Repair

Fixing loose, crushed or leaking fittings that trap lint and push hot air into the wall.

What Our Customers Say

Dryer-vent service reviews reveal safer laundry rooms and faster dry times.

    
 
 
      Trustindex verifies that the original source of the review is Google. Extremely knowledgeable about the Flower Mound area water works.  Very professional, timely, courteous.  Highly recommend.
  
  Posted on Google  
 
    
   Albert de la Guardia 
 
 
 
 
     Trustindex verifies that the original source of the review is Google. JJ and Christian were fast, professional, and provided a wealth of information about how to use our frost proof faucet best. I would highly recommend.
  
  Posted on Google  
 
    
   Shane Anderson 
 
 
 
 
     Trustindex verifies that the original source of the review is Google. Christian and JJ were prompt, professional, and provided some great information on how to make our frost proof faucet to last longer. I would highly recommend!
  
  Posted on Google  
 
    
   Johnathan Anderson 
 
 
 
 
     Trustindex verifies that the original source of the review is Google. As always JJ and Christian were excellent. They were able to come out the same day as our call and had the issue repaired quickly. I highly recommend this team and CR plumbing to everyone.
  
  Posted on Google  
 
    
   Nora Dudek 
 
 
 
 
     Trustindex verifies that the original source of the review is Google. CR was professional and on time. they did the work quickly and
  
  Posted on Google  
 
    
   Sally Z 
 
 
 
 
     Trustindex verifies that the original source of the review is Google. Two fellows who came out and worked on  my Tankless Water Heater ere excellent.  I appreciate the company calling me and reminding me it was time for the service.
  
  Posted on Google  
 
    
   Gil Landry 
 
 
 
 
     Trustindex verifies that the original source of the review is Google. JJ and Christian were excellent. We have a hard problem to fix and he was trying everything under the sun to get it resolved. They were polite and always explaining what step they were trying next. Would highly recommend this team to everyone. They managed to fix the issue with banging pipes that other plumbers were stumped on. Wonderful experience and will recommend to everyone. Thank you JJ!!
  
  Posted on Google  
 
    
   Nora 
 
 
 
 
     Trustindex verifies that the original source of the review is Google. They are very professional, knowledgeable and friendly! We will definitely use their services again and would recommend to anyone!
  
  Posted on Google  
 
    
   Kim Bratton 
 
 
 
 
     Trustindex verifies that the original source of the review is Google. Technicians were wonderful. This was our first time using CR Plumbing and we will use the Platinum Membership once we move to our new home.
  
  Posted on Google  
 
    
   Jay Hunter 
 
 
 
 
     Trustindex verifies that the original source of the review is Google. JJ and Christian came out to do an estimate on some work. JJ clearly explained his recommendations. We look forward to continuing service from CR Plumbing.
  
  Posted on Google  
 
    
   Janice Smith

LOCAL TRUST & PROMOS

Dryer vent and duct services from CR Plumbing, Air & Electric

Here’s what we do, when each service makes sense, and where to go for more detail.

Dryer vent installation and replacement

New home, new dryer, or a vent that’s been wrong since the day it went in? We run rigid or semi-rigid metal duct on the shortest, straightest path to an outside cap, secure the joints, and keep the bends to a minimum. If your old vent is foil, vinyl or crushed behind the machine, replacing it is usually the real fix. Learn more about dryer vent installation .

Dryer vent cleaning and lint removal

Lint collects in the duct and at the cap, and the screen inside the dryer catches only part of it. Cleaning the full length of the run restores airflow and removes fuel from a place where heat is present. We recommend it once a year for most households, more often if you dry a lot of laundry or have pets. See dryer vent cleaning and repair .

Dryer vent repair, elbows and joints

Most damage happens at the connections: a loose elbow behind the dryer, a split joint in the attic, a dented duct squashed by a washer. We fix or replace the damaged section, seal it properly and check that air moves freely when we’re done. This is also where dryer exhaust repair comes in when the vent has come apart or the cap is stuck shut.

Signs your dryer vent needs attention

• Clothes take more than one cycle to dry.

• The top of the dryer or the laundry room feels unusually hot.

• You smell something burning, or a musty, damp smell.

• Lint is collecting around the outside cap, or the flap doesn’t open.

• It’s been years since anyone checked the duct.

If the dryer is hot to the touch and you smell burning, unplug it and call us.

Who does the work

You get a trained technician from our own team, not a subcontractor. We handle plumbing, heating and cooling, and electrical work, so if the problem turns out to be a gas line or a power issue near the dryer, we can sort that out without sending you to someone else. [Confirm CR can quote gas dryer hookups before keeping that line.

Where we work

We install, repair and clean dryer vents across DFW.

frequently asked questions

Who does dryer vent installation near me?

CR Plumbing, Air & Electric does, across the DFW area. Our technicians run the duct, set the outside cap and test airflow before they leave. Call us and we’ll tell you what your home needs.

What makes a dryer vent installation safe and up to code?

Rigid or semi-rigid metal duct, a short and mostly straight run, tight joints that aren’t held together with screws that catch lint, and an outside cap with a working flap. The exact limits depend on your dryer’s manual and local code.

How do I know if my dryer vent is clogged?

The classic signs are clothes that take longer than one cycle, a hot dryer or hot laundry room, and a burning or musty smell. Check the outside cap, too. If it doesn’t open or is full of lint, the duct likely needs attention.

How often should I have my dryer vent cleaned?

Once a year works for most homes. A big family, lots of laundry, pets, or a long vent run with several bends means it’s worth doing more often.

Can a dryer vent repair or replacement be done in one visit?

Usually, yes. Cleanings and most repairs are one visit. Moving the vent to a new wall or fixing a long run in an attic can take longer. We’ll tell you before work starts.

When should I schedule a professional dryer vent inspection?

When the dryer is slow, when you move into a new home, when you replace the dryer, or when it’s been a year or more since the last cleaning. An inspection is a good idea any time you’re unsure what’s behind the machine.

How it Works

Assessment

A technician measures airflow, inspects with a borescope, and quotes flat-rate options.

Implementation

We install or scrub ducts, seal joints, and photograph before-and-after lint conditions.

Quality Check

Post-airflow test confirms <0.6 in-wc back-pressure; you receive photos, video, and maintenance reminders.