Most appliance leaks aren’t the appliance’s fault. They start with a supply line that got reused, a drain hose shoved too far into the box, or a shutoff valve nobody has turned in fifteen years. We handle the plumbing side of dishwasher, washing machine and refrigerator installs for homes in Argyle, Flower Mound, Denton, Fort Worth and nearby towns.
Every hookup follows Texas plumbing code and the manufacturer's instructions, including the high loop or air gap your dishwasher drain needs.
A sloppy install can give a manufacturer a reason to turn down a claim. We follow their install instructions to the letter, so that's never the issue.
We leak-check every connection, clean up the work area, and take the old hoses and supply lines with us.
Just bought a new dishwasher or washer? We can usually get it hooked up the next day.
The new dishwasher is sitting in the garage, the old one’s already out, and the install looks simple enough. Then the old supply line turns out to be too short, the shutoff under the sink won’t close all the way, and the drain fitting doesn’t match the disposal. That’s usually when people call us.
We take care of the water and drain side of appliance installs. Dishwasher installation and hookup, including the supply line, drain hose and connection to your sink drain or disposal. Washing machine hookups, from swapping a leaky washer box to fixing a drain that overflows mid-cycle. Refrigerator and ice maker water lines, run from the nearest cold line to the back of the fridge with its own shutoff.
Hooking up a gas stove or dryer? That involves the gas line, so it has its own page: see our gas appliance hookups.
New hot and cold supply lines to the appliance, sized correctly, with braided stainless connectors instead of the old rubber hoses that split with age.
A dedicated shutoff for each appliance, somewhere you can actually reach it. If the old valve has seized, we replace it while we’re there.
Dishwasher drains tied into the sink or disposal with a proper high loop, and washing machine drains set at the right height so they don’t siphon or overflow.
Water pressure that runs high is hard on appliance valves and hoses. We check yours and can add a pressure-reducing valve if the house needs one.
We run the appliance and check every fitting before we leave. A small drip is easy to miss until it’s soaked the cabinet floor.
No water line behind the fridge? We’ll run one from the nearest cold supply and add a shutoff, so the ice maker and water dispenser work without drips.
Stay protected during heavy Texas storms with professionally installed sump pump systems. We set up both pedestal and submersible units, including battery backup options for uninterrupted performance during power outages. Our installations are designed to keep basements and crawl spaces dry while reducing the risk of flooding and structural damage.
We provide precise plumbing connections for all major household appliances. From washing machines and dishwashers to refrigerator ice maker lines, every installation is completed with secure fittings and proper pressure balance. We also handle select gas appliance connection needs, ensuring safe and code-compliant setups that prevent leaks and improve long-term performance.
Protect your drinking water with expert backflow preventer installation and routine backflow prevention testing. These systems prevent contaminated water from reversing into your clean supply. Our team ensures every device is installed correctly and certified to meet local safety regulations.
Upgrade your home with modern, water-efficient fixtures installed with precision. We handle sinks, faucets, showers, and toilets with careful alignment and sealing. Our experience with bathroom fixture installation allows us to install new fixtures in a way that minimizes wear and helps prevent future issues.
Fix everyday plumbing issues quickly with dependable repair services. We handle leaks, worn-out parts, and performance problems through detailed bathroom fixture repair, targeted shower fixture repair, and reliable toilet repair service. Our goal is to restore functionality and reduce water waste.
Keep your kitchen running smoothly with fast garbage disposal installation and repair. We resolve jams, leaks, and motor issues efficiently, ensuring quiet and reliable operation without disrupting your daily routine.
For deep pipe cleaning, we use advanced hydrojet drain cleaning methods. Our professional hydro jetting services remove grease, sludge, and stubborn clogs using high-pressure water, restoring full flow and improving the overall health of your plumbing system.
Maintain proper drainage with complete sewer line services. We use advanced diagnostics, including camera inspections, to identify blockages, cracks, or buildup. Our efficient sewer repair services restore flow and prevent recurring problems.
Avoid major excavation with modern trenchless solutions. As a trusted sewer line repair company, we use pipe relining techniques to fix damaged lines without tearing up your yard, delivering long-lasting results with minimal disruption.
Ensure a reliable water supply with professional water line services. We handle new water line installation as well as fast water line repair for leaks or aging pipes. Our solutions improve water pressure and system durability using modern materials.
Get consistent hot water with expert tank water heater installation. We also provide dependable tank water heater repair and general hot water heater repair to keep your system running efficiently. For urgent situations, our emergency water heater repair ensures you’re never without hot water for long.
Upgrade to energy-efficient comfort with tankless water heater installation. These systems provide continuous hot water while lowering energy usage. We also offer tankless water heater repair to maintain performance and ensure reliable operation over time.
We handle appliance plumbing across Argyle, Flower Mound, Denton, Fort Worth, North Richland Hills, Keller and the rest of North Texas, from a single dishwasher hookup to a full kitchen and laundry room.
Dishwashers, washing machines, and refrigerators with ice makers or water dispensers. For gas stoves, dryers and other gas appliances, see our gas appliance page.
Most appliance water damage starts at the connection, not the appliance. A reused supply line, a drain hose with no high loop, a shutoff that won’t close. None of it is hard to get right. It just has to be done carefully.
It can. Most manufacturers list installation requirements in the manual, and damage from a connection that doesn’t meet them may not be covered. We follow those instructions on every install.
We check the existing shutoff, supply line and drain, replace anything worn out or the wrong size, connect the appliance, then run it and check every fitting for leaks.
Usually the next day. The plumbing side of a dishwasher or washer hookup takes an hour or two once we’re there, a bit longer if a valve or washer box needs replacing.
Yes. Dishwashers and refrigerators in the kitchen, and washing machines in the laundry room, including washer boxes, drain standpipes and the valves behind the machine.
Yes. If there’s no line behind the fridge, we’ll run one from the nearest cold supply and put a shutoff on it. We do this a lot, usually when someone upgrades to their first fridge with an ice maker.
Usually it’s a partial clog in the drain line, or a standpipe that’s too short for how fast your washer pumps out water. We can clear the line and correct the height.
We check the water supply, shutoff and drain where the appliance is going.
We install new supply lines, drain connections and shutoff valves as needed.
We run the appliance, check every fitting for leaks, and clean up.
3121 Cross Timbers Rd #11 Flower Mound, TX 75028
4925 Davis Blvd Suite 201 North Richland Hills, TX 76137
3113 Elm Park St. Richland Hills, TX 76118
2231 Berniece Jones Rd. #103 Argyle, TX 76226
© 2026 CR Plumbing, Air & Electric. All Rights Reserved. | Powered by Alyne Group