A garbage disposal rarely dies quietly. It hums and won’t spin, it leaks all over the cabinet, or it just stops when you flip the switch. We repair and replace disposals for homes in Denton, Fort Worth, Lewisville, The Colony, Coppell, Flower Mound and across North Texas, and most jobs are done in a single visit.
A kitchen sink you can't use is a real problem. We try to get out the same day, especially if water is backing up.
Licensed plumbers who follow Texas code and the manufacturer's install instructions. And since we do electrical work too, a missing outlet under the sink doesn't mean a second appointment.
In SinkErator, Moen, Waste King, GE, Whirlpool and most others. We work on all of them and carry the parts for the most common repairs.
We put down drop cloths, keep the mess under the sink, and leave your kitchen the way we found it. Minus the broken disposal.
Most disposal problems come down to a handful of things. If it hums but won’t spin, something is jammed between the flywheel and the grind ring, or the motor is starting to seize. If it does nothing at all, the reset button on the bottom may have tripped, or the problem is the switch, the outlet or the breaker.
With leaks, where the water shows up tells you a lot. A leak at the top usually means the seal at the sink flange has failed, which is fixable. A leak at the side is usually the dishwasher hose or the drain connection. A leak from the very bottom of the unit means the seal inside has worn through, and at that point the disposal needs replacing.
We’ll tell you which one you’re dealing with, and the price, before any work starts. Most repairs and replacements are finished on the same visit.
New disposal or a first-time install, we mount it, connect the drain and the dishwasher, and handle the power. That includes knocking out the dishwasher plug inside the new unit, the step people forget right before wondering why the dishwasher won’t drain.
If your unit is stuck or not grinding properly, we offer fast garbage disposal jam removal. We safely clear obstructions like food buildup or foreign objects to restore normal operation and prevent motor damage or further plumbing issues.
Most disposals last somewhere between 8 and 15 years. When yours jams constantly, leaks from the bottom or is simply worn out, we’ll replace it with one sized for how your household actually uses it.
1. Licensed Technicians
Plumbers who install and fix disposals every week, not a handyman trying one for the first time.
2. Transparent Pricing
You see the price before we touch anything. If replacing it costs less than repairing it, we’ll say so.
3. Fast Turnaround
Most jobs take one trip, usually an hour or two.
4. Long Lasting Results Correct mounting, sealed connections and the right size unit. That’s what keeps a disposal from rattling loose or leaking a year later.
5. Clean and Respectful Service
Drop cloths down, cabinet wiped out, and the old unit leaves with us.
Swapping a disposal looks simple on paper. In practice, the mounting ring on the old one rarely matches the new one, the drain arm sits at a different height, and the old unit may have been hardwired instead of plugged in. That’s usually where DIY installs stall out.
When we install one, we replace the mounting assembly so it seals properly to your sink, line up the drain so it won’t leak or back up, connect the dishwasher, and get the power right, whether that’s an outlet under the sink or a hardwired connection. Then we run water through it and check every joint before we leave.
Size matters too. A 1/3 horsepower unit is fine for light use, but a household that cooks a lot is better off with 1/2 or 3/4 HP. They grind faster and jam less. We’ll help you choose if you’re not sure.
And some things should never go down a disposal, however good it is: grease, bones, big batches of potato peels, and stringy stuff like celery or corn husks. Most of the clogs we clear started with one of those.
Humming without spinning, loud grinding or rattling, water leaking under the sink, slow draining, a smell that won’t go away, or a reset button that keeps tripping.
Yes. If it’s leaking from the bottom, the motor is failing, or a repair would cost close to what a new one does, we’ll replace it, usually on the same visit.
Something is stuck between the flywheel and the grind ring, often a fruit pit, a bone or a piece of glass. Turn the switch off and cut the power first. Many units have a hex socket on the bottom you can turn with the small Allen wrench that came with it to free the jam. If it still hums afterward, the motor may be on its way out.
Yes. We find where the water is actually coming from, whether that’s the disposal, the drain, the dishwasher line or the sink itself, and fix that.
Usually 8 to 15 years, depending on the model and how hard it gets used. Higher-horsepower units with stainless parts tend to last longer.
Denton, Fort Worth, Lewisville, The Colony, Coppell, Flower Mound, Carrollton, Arlington, Irving, Argyle, Southlake and the towns around them.
Almost always, the seal inside the unit has worn out and water is getting past it. That isn’t really repairable. The fix is a new disposal.
Look for the small red reset button on the bottom of the unit and press it. Then check the breaker, and make sure it’s plugged in if it’s the plug-in type. If it still won’t do anything, the switch, outlet or motor has failed, and we can figure out which one.
We check the disposal, the drain, the dishwasher connection and the power to find what’s actually wrong.
We clear the jam, fix the leak, or install a new unit sized for your kitchen.
We run water through it, check every connection for leaks, and clean up.
3121 Cross Timbers Rd #11 Flower Mound, TX 75028
4925 Davis Blvd Suite 201 North Richland Hills, TX 76137
3113 Elm Park St. Richland Hills, TX 76118
2231 Berniece Jones Rd. #103 Argyle, TX 76226
© 2026 CR Plumbing, Air & Electric. All Rights Reserved. | Powered by Alyne Group