Do you install gas lines for all household appliances?

Yes. We install gas lines for ranges, dryers, fireplaces, outdoor grills, and water heaters. Each appliance connection, including a water heater gas line, is completed by licensed technicians and follows all local safety and code requirements.

Is a permit required for a water heater gas line installation?

In many cities, permits are required for gas line work, including water heater gas line installations. We handle permit coordination and inspection scheduling when required to ensure compliance and avoid delays.

How do you ensure gas appliance connections are safe?

Every gas appliance connection is pressure tested before use. This includes all installations such as water heater gas line hookups. Testing confirms there are no leaks and that the system operates safely.

Can you replace or modify an existing gas line for a new appliance?

Yes. If an existing gas line does not meet current code or appliance requirements, we can modify or replace it. This includes resizing or rerouting a water heater gas line to ensure proper performance and compliance.

What signs indicate a gas appliance connection problem?

Common signs include a gas odor, poor appliance performance, or unusually high gas bills. These may indicate an issue with a gas appliance connection or a water heater gas line. A professional inspection helps identify and correct the problem safely.

How long does a gas appliance installation usually take?

Most gas appliance line installations are completed within a single visit. More complex projects, such as extending a water heater gas line, may take longer depending on access and permitting. Timing is discussed upfront.

Do you work with inspectors after the installation?

Yes. When inspections are required, we coordinate directly with local inspectors. This applies to all gas appliance work, including water heater gas line installations, to ensure approval without added stress.

How do I schedule a gas appliance or water heater gas line service?

You can schedule service by calling our office or submitting a request through our contact form. A team member will review your needs, explain next steps, and provide clear pricing before work begins.

Serving Argyle, Flower Mound, Keller, North Richland Hills & Surrounding Areas

+ 1200 Reviews

WE OFFER FINANCING

CR Home Protection Plan

Call for Home Services

(940) 370-5663

Gas Fireplace Repair

Most gas fireplaces in North Texas sit untouched from March to November. Then the first cold front rolls in, you flip the switch, and nothing happens. Or the pilot lights and goes right back out. We repair gas fireplaces, valves, burners and the gas lines that feed them, for homes in Argyle, Fort Worth, Flower Mound, Lantana, Denton and Southlake.

Licensed Gas Plumbers

In Texas, gas line work has to be done by a licensed plumber. That's who shows up, and they'll work on the fireplace and the line feeding it.

Complete Fireplace Diagnostics

We check the igniter, pilot, burner, valve and gas connections, so we're fixing the cause and not just relighting the pilot.

Fast & Dependable Repairs

Most repairs are done in one visit. If a part has to be ordered, we'll make sure the fireplace is safe to leave off until it arrives.

Maintenance & Component Replacement

Thermocouples, igniters, valves, burners and gas lines. We replace what's worn out and clean what's just dirty.

Why Choose Us for Gas Fireplace Repair

A lot of people aren’t sure who to call about a gas fireplace. A chimney sweep? An HVAC company? The gas company? For most problems, it’s a plumber. The fireplace runs on a gas line, a shutoff, a valve and a burner, and that’s gas work we do every day.

What we find is usually pretty ordinary. Dust, and sometimes spider webs, clogging the burner ports and pilot tube after a summer off. A thermocouple that’s worn out and can’t hold the valve open. A valve that sticks. Now and then, a loose fitting on the gas line.

None of that means replacing the fireplace. It means finding the one part that’s failing and fixing it before it turns into a safety problem.

Fireplace Valve & Burner Repairs

Weak, uneven or lazy flame? Fireplace won’t come on at all? The valve or burner is often behind it. We repair or replace gas fireplace valves and clean or rebuild burners so the flame burns clean and steady.

Residential Fireplace Solutions

Gas log sets, inserts and built-in gas fireplaces. We service the unit, the controls, and the gas connection behind it.

Emergency Fireplace Repairs

If you smell gas near the fireplace, turn it off, leave the house, and call your gas utility first. Once it’s safe, call us and we’ll find the leak and fix it.

Gas Fireplace Problems We Fix

The pilot won’t stay lit. This is the call we get most. The pilot lights, you let go of the knob, and it goes out. Usually it’s the thermocouple or thermopile, the small sensor that tells the valve the pilot is burning. They wear out over time, and replacing one is a quick job.

The fireplace won’t turn on at all. Check the easy things first. Is the gas valve at the wall open? Does the remote or wall switch have fresh batteries? If both check out, the problem is usually the igniter, the valve, or a pilot tube plugged with dust.

The flame is small, uneven or yellow. Burner ports clog over time, which throws off the flame pattern and makes the fireplace burn dirty. A tall, yellow flame with soot on the glass or logs isn’t just cosmetic. It means the gas isn’t burning cleanly, and it’s worth having someone look at it.

Something’s wrong with the gas line. In older homes, or after a remodel, the line feeding the fireplace can leak at a fitting, or the flex connector may be old enough to need replacing. We repair and replace fireplace gas lines and pressure test them before the gas goes back on.

Most of this is preventable. A yearly check handles a lot of it. Fall is the right time, before you actually need the fireplace. We clean the burner and pilot, check the valve and connections, and make sure it lights and runs the way it should.

Frequently Asked Questions

How do I know if I need gas fireplace repair?

If the pilot won’t stay lit, the fireplace won’t turn on, the flame looks small or yellow, there’s soot on the glass, or you hear clicking with no flame, it’s time to have it checked. Smelling gas is different. Turn it off, get out of the house, and call your gas company.

Do you provide gas fireplace maintenance service?

Yes. A yearly service, ideally in the fall, covers cleaning the burner and pilot, checking the valve, testing ignition and looking over the gas connections.

Can you repair damaged fireplace gas lines?

Yes. We’re licensed plumbers, so we repair and replace the gas line and connector that feed the fireplace, then pressure test everything before the gas goes back on.

What does a gas fireplace technician inspect during service?

The pilot assembly, the thermocouple or thermopile, the igniter, the burner, the gas valve, the connector and shutoff, and how the flame actually looks while it’s running. On vented units we also check that the vent is clear.

Do you handle gas fireplace valve replacement?

Yes. If the valve sticks or doesn’t control the flame properly anymore, we’ll replace it with one that matches your fireplace.

Is gas fireplace burner repair included in your services?

It is. A clogged burner is one of the most common reasons a fireplace burns poorly, and cleaning or repairing it is a regular part of what we do.

How often should I schedule a gas fireplace tune up?

Once a year. Fall is best, before the first cold snap and before everyone else calls at the same time.

Do you offer gas fireplace repair in my area?

We cover Argyle, Fort Worth, Flower Mound, Lantana, Denton, Southlake and the towns nearby across North Texas.

Who do I call to fix a gas fireplace?

For most repairs, a licensed plumber. Pilot, valve, burner and gas line problems are all gas work. If you smell gas, call your gas utility first. If it’s a wood-burning fireplace that needs its chimney cleaned, that’s a job for a chimney sweep.

How it Works

Fireplace System Inspection

Technicians check ignition, burners, valves, and gas lines to pinpoint the issue. Many problems come from hidden wear that affects flame quality or startup.

Repair & Service Work

We complete the required gas fireplace repair, targeted cleaning, and part replacement to restore safe operation.

Testing & Safety Check

The system is tested for ignition, flame stability, and gas flow. This ensures proper performance and confirms if further gas fireplace maintenance service is needed.