Do you provide licensed gas line services in Argyle and nearby areas?

Yes. All gas services are performed by licensed and trained technicians who follow local and state safety codes. We serve Argyle, Flower Mound, Fort Worth, North Richland Hills, Denton, and Southlake. Every job is completed with proper testing and inspection readiness.

How do I know if I have a gas leak in my home?

Common signs include a sulfur or rotten egg smell, hissing sounds near gas lines, or unexplained increases in your gas bill. In some cases, physical symptoms like dizziness or headaches may occur. If you notice any of these signs, it is important to address the issue immediately for safety.

Can you install gas lines for new appliances?

Yes. We install gas lines for cooktops, dryers, fireplaces, outdoor grills, and other gas powered appliances. Each installation is pressure tested and completed according to local code requirements to ensure safe operation and long term reliability.

Do you handle permits and inspections for gas work?

Yes. Our team manages the required permits and coordinates city inspections as part of the service. This helps prevent delays and ensures the work meets all compliance standards, allowing homeowners to move forward without added stress.

What should I do if I suspect a gas leak?

If you smell gas, avoid using electrical switches, open flames, or appliances. Leave the area immediately and contact a licensed gas professional to assess the situation. Prompt action helps reduce safety risks and prevent further damage.

Are your gas line installations tested for safety?

Yes. All gas line installations undergo pressure testing before being placed into service. This confirms there are no leaks and that the system is operating safely. Testing is a critical step in protecting both your home and occupants.

Can you install gas lines for standby generators?

Yes. We handle gas line installations and hookups for permanent standby generators. Our team coordinates with electricians and local inspectors to ensure proper installation, approval, and compliance.

How do I get an estimate for gas services?

You can request an estimate by calling our office or submitting a contact request online. We provide clear pricing and explain available options before work begins so homeowners can make informed decisions without pressure.

Gas Line Services & Repair in DFW

Dependable gas line solutions delivered by licensed professionals.

CR Plumbing, Air & Electric provides licensed gas line services across the Dallas–Fort Worth area: gas line installation and repair, gas leak detection, and appliance hookups. In Texas, most residential gas piping legally requires a licensed plumber — and this company was founded by a Master Plumber, so gas work is done by people qualified to sign off on it.

Gas is the one system in your house where “close enough” isn’t a category. A misread leak or a line that isn’t up to code isn’t an inconvenience — it’s a safety problem. That’s why gas work in Texas isn’t open to any handyman with a wrench: most residential gas piping requires a licensed plumber, and it’s the reason a company built by a Master Plumber has an edge here that a general contractor doesn’t.

Smell gas right now? Leave the house and call (940) 370-5663 — same-day emergency response.

Certified Gas Technicians

CR Plumbing, Air & Electric has licensed professionals who are trained specifically in gas line installations, repairs, and safety standards to ensure every job is completed correctly.

Transparent Estimates

You receive straightforward pricing and clear options before any work begins. No surprises. No pressure.

Emergency Leak Response

Gas issues require immediate attention. Our team responds quickly to identify and resolve leaks while keeping your home safe.

Permits & Inspections Handled

We handle city permits and coordinate inspections so you do not have to deal with the paperwork or delays.

Complete Gas Installation & Repair Solutions You Can Trust

Our team delivers end-to-end solutions, covering everything from expert gas pipe installation to dependable home gas repair, ensuring your system performs efficiently and safely at all times.

We provide safe and professional connections for all major household appliances, including cooktops, dryers, fireplaces, and more. Every appliance hookup is completed with careful attention to detail, ensuring proper flow, secure fittings, and long-term reliability. Our gas installation service ensures everything is connected the right way from day one.

Planning a remodel or adding a new appliance? Our gas line installations are designed to support your evolving needs. If you suspect a home gas leak, notice unusual odors, or see a spike in your utility bills, our expert gas repair service provides fast and accurate solutions. We identify the root cause and resolve it efficiently.

Gas appliances

Gas fireplace repair. Fireplace won’t light, won’t stay lit, or you’re not sure it’s venting right. Diagnosed and repaired by licensed techs.

Gas line installation

Gas leak detection & repair. Unusually high gas bills, a rotten-egg smell, or a pilot that won’t stay lit. We locate the leak and repair it safely – this is the one you don’t put off.

Gas leak repairs

Gas appliance hookups. Ovens, ranges, dryers, water heaters, fireplaces, generators. Connected correctly the first time, so the appliance works and the connection is safe.

Gas fireplace repair

Gas fireplace repairs. Faulty pilot lights, burners, valves, or ignition issues can affect comfort and safety. We diagnose the problem and restore safe, reliable fireplace operation.

Why gas work is different — and who should do it

In Texas, gas piping is a licensed trade for a reason. Residential natural gas work generally requires a licensed plumber, not a handyman. CR Plumbing Air & Electric was founded by a Master Plumber – gas is core to the trade the company was built on, not a sideline.

Every line is pressure-tested and inspected. A gas line that “seems fine” and a gas line that’s been tested to code are two different things. We do the second one, and handle the city permits and inspection so you’re not chasing paperwork.

Same-day emergency response. A suspected leak can’t wait for Tuesday. We respond quickly to locate and stop it.

One provider for the whole job. A new gas range that also needs a dedicated circuit, or a tankless water heater needing gas and water lines – the same licensed team handles all of it, because this is also a plumbing and electrical company.

→ Need the water or electrical side too? See plumbing services and electrical services.

Key facts

Licensed gas line services across the Dallas–Fort Worth metro
Master Plumber–founded – gas piping done by licensed professionals
Gas line installation, leak detection & repair, appliance hookups, and fireplace repair
All lines pressure-tested and code-compliant; permits and inspections handled
Same-day response for suspected gas leaks
One provider for gas, plumbing, electrical, and HVAC

Licensed plumber vs. a handyman for gas work

Gas is the job where the difference actually matters.

	Handyman / general contractor	CR Plumbing, Air & Electric
Legal to do residential gas piping in TX	Often not licensed for it	Licensed – Master Plumber–founded
Pressure test & code compliance	Sometimes skipped	Every line, every time
Permits & city inspection	Left to you	Handled for you
Leak detection	Guesswork	Proper diagnosis, then repair
If the job also needs water or electrical	Another contractor	Same team handles it

How it works

Site check. We inspect your gas line or appliance connection and assess pressure and safety.
Installation or repair. We install, repair, or reroute with licensed technicians – to code.
Safety testing. We pressure-test and complete the safety and inspection checks before we call it done.

Serving the Dallas–Fort Worth area

CR Plumbing, Air & Electric provides gas services across DFW, including Argyle, Flower Mound, Southlake, North Richland Hills, Fort Worth, Denton, and surrounding communities. Find your service area or call (940) 370-5663.

Frequently Asked Questions

What is included in your gas installation service?

A complete, end-to-end job: assessment, permits, the install or repair, pressure testing, and full safety checks. We don’t hand back a line until it’s tested and up to code.

When should I consider a new gas line installation?

When you’re adding or moving a gas appliance, building an outdoor kitchen or pool heater, remodeling, or extending gas to a new part of the house. If an existing line is old or undersized, a new run is often safer than patching.

Do you offer emergency gas leak repair services?

Yes. If you smell gas, leave the house first, then call (940) 370-5663. We respond same-day to locate and stop leaks.

What are the common signs of a home gas leak?

A rotten-egg or sulfur smell, a hissing sound near a line or appliance, an unusually high gas bill, dead vegetation near an underground line, or a pilot light that won’t stay lit. Any of these — call, don’t wait.

Do you provide gas stove repair services?

Yes — and appliance hookups generally. Ovens, ranges, dryers, water heaters, fireplaces, and generators. See gas appliances.

Can you handle gas water heater and gas heater repairs?

Yes. Gas water heaters fall under our plumbing and gas work; fireplaces have their own gas fireplace repair page.

How often should I schedule home gas repair or maintenance?

An annual safety check is reasonable for most homes, and sooner if you notice any of the leak signs above or your system is older.

Do I need a permit for gas line work?

Most gas line installation does require a city permit and inspection. We handle both, so you don’t have to deal with the paperwork or the delays.

How it Works

Site Check

We inspect your gas setup and assess pressure/load needs.

Installation or Repair

We handle installation, rerouting, or repairs with licensed precision.

Safety Testing

We complete gas pressure checks and inspections.

[fluentform id="1"]

WE OFFER FINANCING

CR Home Protection Plan